AerOrod® Heater Specifications

Standard BXX AerOrod Heaters
Part Number	Diameter	Power at 115 Volts	Watt Density at 230 Volts	Power at 230 Volts	Watt Density at 230 Volts	Heated Length (L1)	Un-Heated Length (L2)
Part Number	(inches)	(watts)	(w/in²)	(watts)	(w/in²)	(inches)	(inches)
BXX04B46-4K	0.040	115	20	—	—	46	4
BXX06B41-4K	0.062	300	38	—	—	41	4
BXX06B31-4T	0.062	400	66	—	—	31	4
BXX06B24-4T	0.062	500	107	—	—	24	4
BXX09B88-4T	0.093	300	12	1200	47	88	4
BXX09B53-4T	0.093	500	32	2000	129	53	4
BXX09B38-4T	0.093	700	63	—	—	38	4
BXX09B29-4T	0.093	900	106	—	—	29	4
BXX13B83-4T	0.125	600	18	2400	74	83	4
BXX13B62-4T	0.125	800	33	—	—	62	4
BXX13B50-4T	0.125	1000	51	—	—	50	4
BXX13B33-4T	0.125	1500	116	—	—	33	4
BXX19B94-5T	0.188	1200	22	4800	86	94	5
BXX19B76-5T	0.188	1500	33	—	—	76	5
BXX19B57-5T	0.188	2000	59	—	—	57	5
BXX19B45-5T	0.188	2500	94	—	—	45	5
BXX25B126-5T	0.250	1800	18	7200	73	126	5
BXX25B113-5T	0.250	2000	23	—	—	113	5
BXX25B91-5T	0.250	2500	35	—	—	91	5
BXX25B65-5T	0.250	3500	69	—	—	65	5

Notes: Apply to all BXX heaters

For power at other voltages, multiply power at 115V by (new voltage/115)².
Tolerance on wattages is ± 10%.
Tolerance on diameter D1 is ± 0.005 inch.
Tolerance on heated length (L1) is ± 5%.
Tolerance on cold length (L2) is ± 1 inch.
Sheath material is Inconel 600 unless otherwise specified.
Wire material is nickel-chrome iron with resistivity of 620 ohms – cmf at 68 ºF (20 °C).
These heaters can be coiled or formed to meet your requirements. Please consult with your requirements.
The standard cold lead length are 4 or 5 inches, for our stock heaters.
Cold lead wire material is nickel internally spliced to the heater wires.

BXX Heater Specifications
Diameter ± 0.005″	0.040″	0.063″	0.093″	0.125″	0.188″	0.250″
Ohms/Ft ± 10%	30.0	13.0	6.0	3.2	1.4	0.7
Sheath Diameter (inches)	—	1/16″	3/32″	1/8″	3/16″	1/4″
Sheath Diameter (millimeters)	1.0	1.6	2.4	3.2	4.8	6.4
Maximum Voltage	120	120	230	240	350	450
Maximum Current (amps)	2	4	7	9	17	23
Maximum Hi-Pot Voltage (vac)	250	350	500	750	1100	1500
BXX Standard Max. L1 (inches)	47	120	120	120	133	149
BXX Watt Density “K” Max. (w/in²)	80	65	55	40	25	25
BXX Watt Density “T” Max. (w/in²)	100	150	150	140	100	100
“K” Termination Lead Wire (AWG)	18	18	18	18	18	12
“T” Termination Lead Wire (AWG)	18	18	18	18	18	12
Wire Diameter Approximately (inches)	0.006	0.010	0.015	0.020	0.032	0.040

Standard BXD AerOrod Heaters
Part Number	Diameter	Power at 115 Volts	Watt Density at 230 Volts	Power at 230 Volts	Watt Density at 230 Volts	Heated Length (L1)
Part Number	(inches)	(watts)	(w/in²)	(watts)	(w/in²)	(inches)
BXD04B-71K	0.040	75	8	—	—	71
BXD04B-53K	0.040	100	15	—	—	53
BXD04B-35K	0.040	150	34	—	—	35
BXD06B-61K	0.062	200	17	—	—	61
BXD06B-41T	0.062	300	38	—	—	41
BXD06B-31T	0.062	400	66	—	—	31
BXD09B-88T	0.093	300	12	1200	46	88
BXD09B-53T	0.093	500	32	—	—	53
BXD09B-38T	0.093	700	63	—	—	38
BXD13B-83T	0.125	600	18	2400	73	83
BXD13B-62T	0.125	800	33	—	—	62
BXD13B-50T	0.125	1000	51	—	—	50
BXD19B-126T	0.188	900	12	3600	48	126
BXD19B-94T	0.188	1200	22	—	—	94
BXD19B-76T	0.188	1500	33	—	—	76

Notes: Apply to all BXD Heaters

For power at other voltages, multiply power at 115V by (new voltage/115)².
Tolerance on wattages is ± 10%.
Tolerance on diameter D1 is ± 0.005 inch.
Tolerance on heated length (L1) is ± 5%.
Sheath material is Inconel 600 unless otherwise specified.
Wire material is nickel-chrome iron with resistivity of 620 ohms – cmf at 68 ºF (20 °C).
These heaters can be coiled or formed to meet your requirements. Please consult with your requirements.

Please contact us for further information or any special requirements you may have.